Professionally reconditioned HPC Airtower 19 10 bar screw air compressor, with integrated refrigerant dryer and filters, available to buy or hire from Airlink Compressors.

This is a genuine HPC (Kaeser) Airtower 19: a single-stage, oil-injected rotary screw compressor with the SIGMA PROFILE airend, stacked with a refrigerant dryer in one compact, sound-insulated cabinet. It has been professionally reconditioned and tested in-house by trained Airlink engineers and is supplied ready to install, with air treatment filtration included.

The Airtower layout puts the compressor above the dryer, so you get compressed air, bulk liquid separation and drying from one footprint of about 864 × 936 mm. It suits workshops, vehicle bodyshops, fabrication, packaging, CNC and small manufacturing lines that need reliable 10 bar air without a large plantroom.

Available to buy or hire

• Outright purchase, UK mainland delivery, or collection
• Short- and long-term hire — ask for weekly and monthly rates
• Installation and commissioning available — technical@airlinkcompressors.com
• Call 0800 7555 808 or email info@airlinkcompressors.com

In-house reconditioning and test Every machine is prepared by trained engineers in the Airlink workshop before it is offered for sale or hire. Work typically includes:

• Full inspection of the airend, drive, motor, electrics and safety devices
• Service of the intake filter, oil filter, separator and drive belts, with fresh compressor fluid
• Check and function test of the integrated refrigerant dryer, hot-gas bypass and electronic condensate drains
• Inspection of the cyclone separator and downstream filters
• Clean-down of the enclosure, cooler and intake mats
• Run and load test to working pressure, with leak and temperature checks

Loaded hours, year of manufacture and the test sheet are confirmed with the machine. Ask us for the latest figures before you order.

Why the Airtower 19

• Genuine HPC / Kaeser SIGMA PROFILE airend, single-stage, fluid-injected
• 11 kW (15 hp) motor, IP54, star-delta starting, 400 V 3-phase, 50 Hz
• Automatic belt tensioning — no routine re-tensioning
• Dual anti-vibration mounts and a powder-coated acoustic canopy
• 67 dB(A) free-field at 1 m — practical for a workshop, not only a plantroom
• Cyclone separator with electronic condensate drain
• Integrated CFC-free refrigerant dryer (R134a, about 0.66 kW), hot-gas bypass control, separate IP54 dryer panel and electronic drain
• Supplied with air filters so oil aerosol and particulates are treated after drying
• Small footprint: 864 mm wide × 936 mm deep × 1,500 mm high, about 370 kg

Performance (complete unit, ISO 1217:1996 Annex C)

Flow is the published figure for the complete Airtower at 10 bar. Site delivery depends on intake conditions, pipework, leaks and how the machine is set. The 7.5 bar variant of this model is rated 1.86 m³/min (66 cfm); this listing is the 10 bar machine.

Air treatment The package includes the factory cyclone separator and electronic drain, the built-in refrigerant dryer (typically a +3 °C pressure dew point when correctly applied — ISO 8573-1 Class 4 for moisture), and downstream filters. Fit the filters after the dryer. Confirm the installed grade (usually a general-purpose coalescer and a high-efficiency oil-removal filter) if you need a stated ISO 8573 particle or oil class for spraying, instrumentation or food-contact air. Breathing air and direct food contact need a separate specification.

Typical uses

• General workshop and garage air tools
• Fabrication, assembly and packaging
• Small CNC and machine-shop duty
• Spray and blow-off work once filtration is matched to the process
• Standby or hire cover while a main compressor is serviced

What to plan for on site

• Level floor able to take about 370 kg, with clearance for cooling air in and out
• 400 V three-phase supply sized for an 11 kW star-delta motor, plus the dryer supply
• Condensate piped to a suitable oil-water separator — do not run oily condensate straight to drain
• Adequate ventilation; the compressor and dryer each have their own cooling-air path
• Isolation, receiver and pipework to suit your demand. A receiver is not built into the standard Airtower cabinet — we can supply one

Delivery, hire and support Airlink Compressors supplies this machine for sale or hire across the UK, with workshop back-up from Gosport, Silverstone, Yorkshire and Cheshire. Warranty terms are confirmed on the order. Spares and service kits for the SK19 / Airtower 19 are widely available.

Call 0800 7555 808, email info@airlinkcompressors.com, or use the enquiry form and tell us whether you want to buy or hire.

Yes, airlinkcompressors.com offer an installation & commissioning service, please contact support for further information on technical@airlinkcompressors.com

If you purchase any equipment from airlinkcompressors.com you are entitled to free full technical support from experts in the trade, supporting with installation, repairs & servicing. We also offer onging maintenance packages inhouse, please contact technical@airlinkcompressors.com for further information.

Yes, airlinkcompressors.com deliveries can be sent to different adresses across the UK.

Yes, we do deliver to NI (Northern Ireland) for larger items please ask for a carrige costing - sales@airlinkcompressors.com

Yes, a VAT invoice is sent automatically once the order has been dispatched to the email address supplied when originally ordered.

Yes, airlinkcompressors.com offer an installment option through Klarna, Please click here for further information.